Tag Archives | power

Basic Solar Panel Installation Guide

For those of you who are DIY professionals or even semi skilled, a DIY solar panel installation home kit is something you may want to consider. There are many solar panel kits that you can buy, allowing you to do the installation on your own, and save some money in the process. You will learn some great key skills in the process and if confident enough, go on to fit solar panel kits for friends and family and maybe even earn some extra pocket money.

DIY solar panel installationWith a DIY solar panel installation kit, you can expect to spend between $10,000 to $15,000 in cost, as opposed to hiring a contractor, who is likely to charge at least double this, for the installation, and for the service charges to actually install the panels.

So, when considering the DIY solar panels for home use, there are a few steps to consider when building, in order to ensure you build DIY solar panels and the system properly.

DIY Solar Panel Installation Will Save You A Fortune

When doing the work, making sure you follow the solar panel installation instructions, and the steps is key to quality installation; regardless of which DIY solar panel install guide you choose to follow, or which panels you choose to buy, it is critical that you follow the basic steps to construct the system.

With a do it yourself solar panels system, the following steps might make the entire process a bit easier for those who are building the panels and installing it over their home (or for a building).

The Steps For Building Your Own DIY Solar Panel Installation For Your Property

First off, is burying the conduit from the house or building it is going to be installed in, to the area where the solar panels will be installed. Once this is completed, you will next build a platform made with concrete pillars (about 4 X 4), in order to provide support for the panels.

Step two in the solar panel installation process is going to be mounting the panels. Here you will mount the panels to the platform, and angle the brackets (which are going to be used as mounting points), then the front feet of the mounting points will be laid down. Prior to securing the feet, they should be squared and centered.

Step three in the process is to secure the legs in the rear. Making sure you first find the proper angle (using meteorological data), is going to make for the right angles, and will help keep the feet, and the solar panels in place.

Next step in the DIY solar panel installation process is to wire the solar modules. You will join them at the junction connector (or fuse box connector). These will be stripped and wired in pairs, prior to connecting them to the fuse box.

Making sure you keep all safety precautions in mind when doing this electrical work is key to avoid injury, and to ensure it is properly done. Inside of the terminal box, the wires have to be properly connected and secured prior to moving on.

Once the wires are properly connection, they will then be fed through the junction box, and will be connected to the corresponding terminals (negative and the positive terminals).

Understanding the wire connections is step five in the DIY solar panel installation process. Now that everything is properly aligned and connected, it is time for you to connect the interior control panels.

Connecting the solar breaker to the circuit breaker disconnect comes first; energy will flow from the disconnect, down to the battery bank, which will in turn store the energy. The converted power will flow to the electric power, which will in turn provide power to the home (or building). It is wise to connect a back up gas generator to the solar panel system, which will be connected to the main electrical system, in order to ensure everything is properly functioning.

Connecting the cables to the control panels is the next step with the do it yourself solar panels. Running the cable from the solar array in to the home through the conduit is the initial step.

You can use a nylon rope to connect the cables, and pull the conduit through the inverter panels. You will then connect the cables at the fuse combiner box (at the base of your solar array). You will connect the green cables to the ground strip, and the red ones to the PV positive terminal.

The seventh step is to ground the entire system. You can tap a grounding rod near the array, leaving a long rod extending out about 6” above the ground. You can then run copper wiring from the rod to the fuse box, and then from the solar panels to the fuse box, in order to keep everything in place and grounded.

The eight, and final step for the DIY solar panel installation is to make internal connections (in the home or building). You will run the cables from the array to the inverter panel disconnect. You will then connect the wires (red to the positive terminal, green to the grounding wire, and black to the negative terminal).

Always Take Great Care when Completing A DIY Solar Panel Installation Job

The batter bank is then installed above the loft area (over the new control panels). From here the conduit is run through the ceiling and to the inverter wire. You will then feed the heavy duty battery cables (2) to the panel disconnect (the opposite ends of the cables are connected to the battery pack).

solar install kitsEnsuring the battery system is installed in a series (alternate the positive and negative to hold things in place), is something to make sure of. And lastly, when everything is in place, you will check the systems, to ensure it is properly working.

Although there are many different kits that one can choose from, when doing a solar panel installation, you will find that this is the basic pattern and layout which most instructions and guides are going to offer for you to follow.

Although you will not get the same exact set of directions with each kit, it is critical that you follow the solar panel installation guide exactly as instructed (in the order), and that you test everything prior to moving on to the next step. You can install your own panels at home if you have the time, patience, the right materials, and if you are able to follow the instructions exactly as laid out, to ensure things are properly completed.

DIY Solar Panel Kits

DIY Solar Power Kits Will Save You Money $$

More and more people are wanting to reduce their monthly electricity bills as much as possible these days. The cost of producing electricity with fossil fuels is just getting too expensive in recent years. As such, many people have already decided to install solar panels on their home. However, since commercially manufactured solar panels are so expensive, many people have opted to make their own instead.

DIY Solar Panel Kits

Not everyone has the skill sets needed to build a solar panel from scratch. Maybe you can’t solder or lack the ability to build the frame for your panel. Regardless of your reasons for not building your own solar panels, it is good to know that today one only needs to buy DIY solar power kits.

For most who do not have the thousands needed to purchase commercial panels and lack the time and skills to build a panel from scratch, a DIY solar panel kit is the obvious solution. Furthermore, it offers anyone who has very little knowledge about solar energy an in-depth introduction to the many aspects of building a panel.

There are many different kits that are available today. You can get small kits that are good for only a few watts, or you can get large sets that can produce thousands of watts of power. Furthermore the amount of skill needed to assemble a panel from a kit can vary depending on the company offering it. For the beginner, you may only need to make a few solders and then screw together two panels. However, for the more advanced kits, you may need to do all of the soldering and assembling because you are only provided with the basic parts precut and drilled.

If you have ever looked into the cost of installing a solar panel ,then you will notice that a commercially made unit can cost thousands of dollars. If you hire a company to install it, the price can get even higher. However, if you buy your own cells and make every part of the panel from scratch, then it may only cost a couple hundred dollars to build a panel. DIY solar power kits on the other hand cost only slightly more than a build from scratch, yet included professionally cut and drilled pieces that come complete with a warrantee.

Don’t be intimidated by the thought of building your own solar panel. Sure the first one you build may not be that easy to complete, but once you have the opportunity to build one panel, each new one that you build is just that much easier. Since most homes will need many panels to provide a complete off-grid experience, you will have plenty of opportunities to become an expert in building your own solar power systems.

Start off the right way by using a DIY solar power kit and build up the experience you need to build larger and more complex systems. You will learn a lot from the experience and also save a bundle in the process. So whether you lack the skills or time needed to build a panel from scratch, or just do not want to spend the large quantities needed to purchase commercial units, a kit is the best option.

Just think, in no time you can be producing your own electricity. Start off small and create enough electricity to power some small appliances in your home and then work your way up. In time, you will be able to love entirely off-grid. If you are lucky enough to live in an area which allows you to sell your excess energy back to the power companies, than you actually make some profit in the process.get some help with the install

You will be doing your part to help save the environment and develop a more sustainable community by choosing to make use of solar panel in your home or business. Countless home owners and business owners across the nation have already installed solar panels and are reaping the many benefits of solar power.

While the costs of solar technologies are steadily decreasing, don’t sit around and wait too long to install your first solar panel by choosing to put together a do-it-yourself kit that is ready to go and easy to assemble.


Advantages Of Solar Energy