Tag Archives | home

Basic Solar Panel Installation Guide

For those of you who are DIY professionals or even semi skilled, a DIY solar panel installation home kit is something you may want to consider. There are many solar panel kits that you can buy, allowing you to do the installation on your own, and save some money in the process. You will learn some great key skills in the process and if confident enough, go on to fit solar panel kits for friends and family and maybe even earn some extra pocket money.

DIY solar panel installationWith a DIY solar panel installation kit, you can expect to spend between $10,000 to $15,000 in cost, as opposed to hiring a contractor, who is likely to charge at least double this, for the installation, and for the service charges to actually install the panels.

So, when considering the DIY solar panels for home use, there are a few steps to consider when building, in order to ensure you build DIY solar panels and the system properly.

DIY Solar Panel Installation Will Save You A Fortune

When doing the work, making sure you follow the solar panel installation instructions, and the steps is key to quality installation; regardless of which DIY solar panel install guide you choose to follow, or which panels you choose to buy, it is critical that you follow the basic steps to construct the system.

With a do it yourself solar panels system, the following steps might make the entire process a bit easier for those who are building the panels and installing it over their home (or for a building).

The Steps For Building Your Own DIY Solar Panel Installation For Your Property

First off, is burying the conduit from the house or building it is going to be installed in, to the area where the solar panels will be installed. Once this is completed, you will next build a platform made with concrete pillars (about 4 X 4), in order to provide support for the panels.

Step two in the solar panel installation process is going to be mounting the panels. Here you will mount the panels to the platform, and angle the brackets (which are going to be used as mounting points), then the front feet of the mounting points will be laid down. Prior to securing the feet, they should be squared and centered.

Step three in the process is to secure the legs in the rear. Making sure you first find the proper angle (using meteorological data), is going to make for the right angles, and will help keep the feet, and the solar panels in place.

Next step in the DIY solar panel installation process is to wire the solar modules. You will join them at the junction connector (or fuse box connector). These will be stripped and wired in pairs, prior to connecting them to the fuse box.

Making sure you keep all safety precautions in mind when doing this electrical work is key to avoid injury, and to ensure it is properly done. Inside of the terminal box, the wires have to be properly connected and secured prior to moving on.

Once the wires are properly connection, they will then be fed through the junction box, and will be connected to the corresponding terminals (negative and the positive terminals).

Understanding the wire connections is step five in the DIY solar panel installation process. Now that everything is properly aligned and connected, it is time for you to connect the interior control panels.

Connecting the solar breaker to the circuit breaker disconnect comes first; energy will flow from the disconnect, down to the battery bank, which will in turn store the energy. The converted power will flow to the electric power, which will in turn provide power to the home (or building). It is wise to connect a back up gas generator to the solar panel system, which will be connected to the main electrical system, in order to ensure everything is properly functioning.

Connecting the cables to the control panels is the next step with the do it yourself solar panels. Running the cable from the solar array in to the home through the conduit is the initial step.

You can use a nylon rope to connect the cables, and pull the conduit through the inverter panels. You will then connect the cables at the fuse combiner box (at the base of your solar array). You will connect the green cables to the ground strip, and the red ones to the PV positive terminal.

The seventh step is to ground the entire system. You can tap a grounding rod near the array, leaving a long rod extending out about 6” above the ground. You can then run copper wiring from the rod to the fuse box, and then from the solar panels to the fuse box, in order to keep everything in place and grounded.

The eight, and final step for the DIY solar panel installation is to make internal connections (in the home or building). You will run the cables from the array to the inverter panel disconnect. You will then connect the wires (red to the positive terminal, green to the grounding wire, and black to the negative terminal).

Always Take Great Care when Completing A DIY Solar Panel Installation Job

The batter bank is then installed above the loft area (over the new control panels). From here the conduit is run through the ceiling and to the inverter wire. You will then feed the heavy duty battery cables (2) to the panel disconnect (the opposite ends of the cables are connected to the battery pack).

solar install kitsEnsuring the battery system is installed in a series (alternate the positive and negative to hold things in place), is something to make sure of. And lastly, when everything is in place, you will check the systems, to ensure it is properly working.

Although there are many different kits that one can choose from, when doing a solar panel installation, you will find that this is the basic pattern and layout which most instructions and guides are going to offer for you to follow.

Although you will not get the same exact set of directions with each kit, it is critical that you follow the solar panel installation guide exactly as instructed (in the order), and that you test everything prior to moving on to the next step. You can install your own panels at home if you have the time, patience, the right materials, and if you are able to follow the instructions exactly as laid out, to ensure things are properly completed.

DIY Solar Panel Kits

Building Home Solar Panels Can Be Easy

If you are becoming concerned with the increase in your electricity bills, or if you wish to become more green, then you may wish to consider DIY solar panels for your home as a real alternative.

DIY Solar Panels For Your Home

Building them is easier, and cheaper, than you may initially think and the savings that you then make on your power bills will last for a lifetime.

As energy prices only look to ever be on an upwards spiral it makes sense to look at how you can start to harness your own as the savings can be huge.

Don’t Be Put Off By Installing Your Own DIY Solar Panels For Your Home

A lot of people believe that in order to get solar panels that they need to hire a company who will both supply them as well as fit them and there is often quite a hefty bill attached. These companies will pass the panels off as being relatively complex to create and that they require some expert knowledge however this is certainly not the case.

In actual fact as long as you have basic DIY skills and can follow instructions then there is no reason why you cannot manage to put your own panels together in only a matter of days, or less for some people.

It is perhaps best to also point out that the days of solar panels just being on the roof of your house are long gone and also, due to improvements in technology, the size of the panels themselves have also decreased but with them still having the capabilities of generating even more electricity than the older, larger versions.

It is now more common to have them in gardens or any area that is capable of getting as much light as possible so they are often more hidden in corners and not just taking over the entire roof and standing out on their own.

Building DIY Solar Panels For Your Home Can Be Fun And Rewarding

In order to actually build DIY solar panels for your home use, you are going to need some help and not just with the actual construction but also to ensure you have the correct equipment and individual items so that it all works.

The good thing is that there is actually help at hand and perhaps the best part is that the instructions you can receive are easy to follow meaning even a relative novice will be able to follow them and complete the actual panels, and therefore start generating some power.

Getting the correct guidelines on how to go and build DIY solar panels for your home really is important as it is actually quite easy to make a mistake at some point which would then render the entire panel useless, and you may have some difficulty in working out where you went wrong.

Good solar panel installation instructions should make it seem as easy as building some flat pack furniture and everyone knows how with that it is a case of just following individual steps and, as long as you do not skim read, you do know you will eventually end up with an item that is identical to the picture at the final step.

So what is actually involved in building your very own do it yourself solar panels? First of all you need to make sure that you have the correct kit, this is something you will learn about in the DIY solar panel installation guide, and apart from the kit you will mainly just require wood to create the frame upon which the panels will be fitted.

The kit itself will include the actual solar cells, that will of course capture the light, as well as the various pieces of electrical equipment that is required to convert it into actual energy that can be used in your home.

This may make you believe that you would therefore require an actual electrician however this is not the case and it will be proven to you in the guide. The only help you may require is borrowing a soldering iron if you do not already have one.

The cells need to be connected up on the panel, which involves them being wired together, and the frame encases the entire thing. There is of course more to it than just this but that is why you should get a guide that offers step by step instructions right from the very beginning.

multi panel roof

Once it has been built you then of course need to know how to link it in to your existing supply but this is also something that will be covered in the guide.

This is a key part as it is where you really discover if you have followed the instructions correctly or not

The total cost of building these panels will depend upon how many you want as well as the actual size or even the quality of the kit. There are several kits that you can go and purchase with them varying in how much power they can then create, including kits that are pre tabbed which makes your life a lot easier, but no matter which one you buy you will find that the instructions you are following can guide you through it all.

How Much Can I Save If I Purchase A DIY Solar Panels Kit For my Home??

How much can it save you? This does of course depend upon how many you build and how much power they are able to generate but there is no doubt that one panel to the specifications that are in the guidelines will be enough to make a substantial difference to your energy bills. You do of course then have the option of building more using the same guide in order to bring the savings down even further.

So if you are indeed considering DIY solar panels for your home then all you need to do is make sure you have the correct instructions on how to build them and then actually follow each step and you should really have no problems whatsoever. By getting these instructions you will find out exactly what you need to get in order to complete the job and you can then look forward to getting them up and working and generating that power for your home.

DIY Solar Panel Installation